| Material Type |
SS PCB |
DS PTH |
MULTILAYER PCB |
| Laminate Used |
FR-1, FR-2, CEM-1, CEM-3, FR-4 |
CEM-3, FR-4 |
FR-4 |
| Doosan, Hitachi,Isola |
Doosan,Shenyi, Kingboard |
Doosan,Shenyi,Kingboard |
| High CTI Laminate Available |
High CTI Laminate Available |
High CTI Laminate Available |
| Halogen Free Laminate |
High TG Performance Laminate |
High TG Performance Laminate |
| Upon Request |
Upon Request |
Upon Request |
| Overall Thickness |
0.80mm to 2.00mm |
0.40mm to 2.00mm , Max. 2 Layers |
0.40mm to 2.00mm , Max. 4-16 Layers |
| Copper Foil Thickness |
35um, 70um |
35um, 70um, 105um |
35um, 70um ,105 um |
| Pattern Image |
Line / Spacing 0.20mm |
Line / Spacing 0.10mm |
Line / Spacing 0.10mm |
| Solder Mask |
UV, PISR Upon Request |
PISR |
PISR |
| Tamura/Union/Taiyo/Coates |
Min. opening 0.10mm |
Min. opening 0.10mm |
| |
Coates, Taiyo, Peters, Vantico |
Coates, Taiyo, Peters, Vantico |
| |
Green, Yellow, Blue, Black |
Green, Yellow, Blue, Black |
| Legend |
UV |
UV |
UV |
| Min. Feature Width 0.18mm |
Min. Feature Width 0.18mm |
Min. Feature Width 0.20mm |
| Product dentification |
Week Code Printed On Legend |
Week Code Printed On Legend |
Week Code Printed On Legend |
| Peelablemask |
Maximum Tenting hole size 2.80mm |
Maximum Tenting hole size 2.80mm |
Maximum Tenting hole size 2.80mm |
| Fabrication |
Minimum Hole Size For NC Drill 0.30mm, for Punch 0.65mm |
Minimum Hole Size For NC Drill 0.25mm, for Punch 0.30mm |
Minimum Hole Size For NC Drill 0.25mm, for Punch 0.30mm |
| Minimum Punch Soft Tool Shelf Life 200k |
Minimum Punch Harden Tool Shelf Life 150k |
Minimum Punch Harden Tool Shelf Life 150k |
| Minimum Punch Harden Tool Shelf Life 150k |
FR-4 Not Recommended to Punch Hole |
FR-4 Not Recommended to Punch Hole |
| FR-4 Not Recommended to Punch Hole |
V-Cut is available |
V-Cut is available |
| V-Cut is available |
Chamfering is Available |
Chamfering is Available |
| Chamfering is Available |
|
|
| Surface Finishing |
Electrolytic Ni/Au Plating for SS PCB |
ENIG |
ENIG |
| Rosin Flux Coating |
OSP Coating |
OSP Coating |
| OSP Coating |
HAL or HASL |
HAL or HASL |
| Roller Tin on SS PCB, HAL on CEM-3, FR-4 Products |
|
|
| Products Acceptance Criteria |
Follow IPC-A-600 Acceptance Criteria |
Follow IPC-A-600 Acceptance Criteria |
Follow IPC-A-600 Acceptance Criteria |
